 2009 Product Timetable Available - Download here.
Contact us now for details of any product you would like to receive further information on.
Pulsar-IDX
| Features |
Carbide Ball Inserts with Helical End Gash Geometry, Polished Cutting Edges, Special Coatings. |
| Benefits |
Low milling torque, no chattering, good chip ejection, prolonged tool life.
Repeatability in performance, improved work-piece finish, faster speeds & feeds.
HOLDER ADVANTAGES: Premium alloy steel with excellent strength, precise shank, tolerance h6.
Black oxide treated, to prevent corrosion and improve lubricity. Click here for further information |
| Application |
Machining carbon & alloy steels, die tool steels & hardened steels. |
|
 |
Pulsar Blue
| Features |
NG HM Nano Grain Carbide with new high performance blue coating.
High precision cutter geometry. |
| Benefits |
Designed to machine high-hardened materials up to HRc70.
Suitable for dry & high-speed cutting condition.
Excellent high quality workpiece finish.
Exceptional long tool life higher wear resistance due to blue coating. |
| Application |
Milling alloy steels, heat resistant steels & hardened steels
HRc30 to HRc70 |
 |
 |
Pulsar
| Features |
NG HM Nano Grain Carbide with TIALN Coating. |
| Benefits |
Designed to machine high-hardened materials up to HRc65.
Suitable for dry & high speed cutting condition.
Excellent high quality workpiece finish.
Exceptional long tool life.
Extensive product ranges and wide ranges of sizes from 0.4mm to 25mm |
| Application |
Milling alloy steels, heat resistant steels & hardened steels, cast iron,
and non-alloy steels
HRc30 to HRc65. |
|
 |
ET1
| Features |
MG HM Ultra micro Grain Carbide with TIALN Coating. |
| Benefits |
Designed to machine low hardness materials under HRc45.
High speed cutting condition.
Exceptional long tool life.
Geometry designed to avoid removal of sharp cutting edges & avoid
corner chipping. |
| Application |
Milling stainless, titanium, inconel & low hardness materials under
HRc45. |
|
 |
HX2 STAGGERED HELIX
| Features |
MG HM Ultra micro Grain Carbide with ALTIN Coating.
Unique sinusoidal flute form with staggered helix geometry. |
| Benefits |
Reduces resonance vibration minimizing tool deflection.
Gives faster and deeper machining.
Improves surface finish due to chatter free tool design.
Very smooth chip removal and silent machining. |
| Application |
Milling alloy steels, cast iron, stainless steels 300 & 400 series,
Titanium, inconel & low hardness materials under HRc45. |
|
 |
ALU-XP
| Features |
MG HM Ultra micro Grain Carbide bright & with TICN Coating.
Geometry designed for the machining of Aluminum and its alloys,
Copper & non-ferrous materials. |
| Benefits |
Excellent tool life and higher cutting accuracy.
Excellent chip removal.
High speed machining. |
| Application |
Milling aluminum, low silicon aluminum, & copper alloys. |
|
 |
STANDARD SOLID CARBIDE
| Features |
MG HM k30 micro Grain Carbide bright & with TIALN Coating. |
| Benefits |
General purpose machining on a wide selection of material.
Excellent tool life and performance.
Will machine materials up to HRc50 with TIALN coating HRc55.
Extensive product ranges in metric & imperial sizes. |
| Application |
Milling carbon steels, alloy steels, tool steels, stainless steel, titanium,
cast iron, aluminum alloys, copper, brass & non-ferrous metals from
HRc20 to HRc55. |
|
 |
SABRE ROUGHING CUTTERS
| Features |
Premium PM material & Sabre Coating. |
| Benefits |
New material and coating gives higher speed & feed rates.
High-speed cutting.
Excellent surface finish. |
| Application |
High-Feed roughing milling in structural steels, carbon steels, alloy
steels, tool steels up to HRc40. |
|
 |
HSS & COBALT MILLING CUTTERS
| Features |
Products in Hss, M35 (5% cobalt) & M42 (8% cobalt) with coatings
TIALN, Ticn & Tin. |
| Benefits |
Produced from high quality HSS materials.
Extensive range of products in metric and imperial sizes.
Also available in screwed shank.
Ideal for machines with limited speed & feed rates.
Low tool costs.
Ideal for machining non-ferrous metals, & non metallic materials. |
| Application |
Milling applications in carbon steels, alloy steels, tool steels,
aluminum, aluminum alloys non-ferrous metals. |
|
 |
SPADE DRILL SYSTEM
| Features |
Spade Inserts produced in HSS grades M4, T15 & M48,
Carbide grades K10, K20 & P40 all available with
coatings TIALN, TICN & TIN.
Holders and accessories. |
| Benefits |
Wide range of inserts suitable for drilling all materials.
Reduces machine set up time (easy to change insert).
Reduces tooling cost. One holder will hold many different inserts.
Holders available with taper & straight shanks.
Straight shank holders have through coolant.
Reduces need for regrind of large drills just replace insert.
Large size range covered in product range 9.5mm to 114.3mm. |
| Application |
All Drilling applications wide range of inserts in HSS & Carbide covers
Drilling in structural steels, low & medium carbon steels, alloy steels,
tool steel, cast iron, S.G.Iron, high temp. Alloy, high strength alloy,
aluminum, stainless steel 300 & 400 series, aluminum bronze, brass &
copper. |
|
 |
SOLID CARBIDE DRILLS
| Features |
MG HM k30 micro Grain Carbide bright & with TIALN Coating. |
| Benefits |
Increased speed & Feeds.
Increased tool life.
802323-product range comes with self-centering point, excellent positioning so bushing is not required. Reaming application is not required.
Good chip removal & powerful drilling.
Product ranges 803323 (3d), 804323 (5d) & 805323 (8d) come with all
Features of 802323 range but with the added advantage of through coolant holes. |
| Application |
This product range will cover drilling in tools steels, aluminum, aluminum alloy, brass, bronze, glass fiber & epoxy resin, non-alloy steels, alloy steels, soft grey cast iron, hard grey cast iron,
stainless steels & aluminum silicon alloys. |
|
 |
HPD & HPD-SUS DRILLS
| Features |
HSS-EX material with Superior TIN coating. |
| Benefits |
HPD-SUS drill range. (Stub & Jobber length)
Geometry designed to give sharp cutting edges to avoid built-up and be suitable for high performance drilling.
Excellent chip removal.
Reduces vibration and deflection.
Higher speed & feeds.
Longer tool life.
Excellent surface finishes.
HPD drill range. (Jobber Length)
Self-centering point, reducing thrust and improving accuracy.
Geometry gives increased rigidity suitable for 4D-5D drilling.
Higher speed & feeds.
Longer tool life.
Excellent surface finishes |
| Application |
HPD-SUS Drill range for drilling in stainless steels, mild steels, aluminum, aluminum alloy, copper & copper alloy.
HPD Drill range for drilling in mild steel, alloyed steel, tool steel,
cast iron & aluminum alloy. |
|
 |
GOLDEX JOBBER DRILLS
| Features |
HSS Bright body with TIN coating on working part of drill.
118 degree Split point. |
| Benefits |
High quality coated drill at low tool costs.
Good general drill performance on wide range of materials.
Good quality coating gives longer tool life |
| Application |
Drilling in Steel, cast steel alloyed & non-alloyed, grey cast iron, graphite & malleable cast iron. |
|
 |
APPLICATION MACHINE TAPS
| Features |
All taps made from M35 Material with various coatings & treatments to suit all tapping applications.
All Taps identified with colour ring for selection of tapping material
Thread forms available Metric Coarse, Metric Fine, UNC & UNF.
Machine Taps – Spiral point, Spiral Flute, Straight Flute, & Cold
Forming Taps & Nut Taps. |
| Benefits |
The High-speed steels we use gives good wear resistance & toughness.
The various treatments and coatings on our Taps are selected to suit the
Component Material and therefore give added performance and tool life.
In particular our HARDSLICK COATING for stainless steel taps gives
Incredible tapping performance and tool life. The HARDSLICK coating is a special coating which as sliding and lubricating properties combined with an Hardness of approx. 3,000 HV and is temperature-resistant up to approx. 800 deg.C. |
| Application |
Aluminum – Blue ring
General Steels – Yellow ring
Heat Treated Steels – Red ring
Stainless Steels & Low Carbon Steels – Green ring
Grey Cast Iron – White ring
|
|
 |
|
